Carbonbeton - Eine neue Verstärkungsmethode für Massivbrücken: Teil 2 - Carbonbeton im Brückenbau und Informationen zur Zustimmung im Einzelfall für das Pilotprojekt "Brücken über die Nidda im Zuge der BAB A 648"
Research output: Contribution to journal › Research article › Contributed › peer-review
Contributors
Abstract
In 2020 two of three bridges, which are part of the german
highway road A 648, were strengthened with carbon reinforced
concrete for the first time in Germany. The two superstructures
were erected in the 1970s as a pre-stressed beam. As tendons
a so called -sigma-oval-steel was used, which is sensitive for
stress corrosion cracking. According to German guidelines and
to exclude a sudden failure, it has to be verified if a damage of
the tendons can be seen at the surface of the cross section via
cracks along the superstructure. This -crack before failurecriteria
was not fulfil for the described superstructures. With
reference to the relevance of the bridges in the local infrastructure
around Frankfurt a. M., a strengthening concept was
necessary. Due to that fact, a strengthening with carbon reinforced
concrete was identified as an economic and minimal
invasive method. The report on that forerunner project is
spread into three parts. The first part gives an overview about
the bridges and the background on stress corrosion cracking,
added with explanations about the planning steps. The following
second part describes the strengthening with carbon reinforced
concrete with focus on bridges. The third part goes
further into detail, regarding the construction and the design of
a carbon reinforced strengthening.
highway road A 648, were strengthened with carbon reinforced
concrete for the first time in Germany. The two superstructures
were erected in the 1970s as a pre-stressed beam. As tendons
a so called -sigma-oval-steel was used, which is sensitive for
stress corrosion cracking. According to German guidelines and
to exclude a sudden failure, it has to be verified if a damage of
the tendons can be seen at the surface of the cross section via
cracks along the superstructure. This -crack before failurecriteria
was not fulfil for the described superstructures. With
reference to the relevance of the bridges in the local infrastructure
around Frankfurt a. M., a strengthening concept was
necessary. Due to that fact, a strengthening with carbon reinforced
concrete was identified as an economic and minimal
invasive method. The report on that forerunner project is
spread into three parts. The first part gives an overview about
the bridges and the background on stress corrosion cracking,
added with explanations about the planning steps. The following
second part describes the strengthening with carbon reinforced
concrete with focus on bridges. The third part goes
further into detail, regarding the construction and the design of
a carbon reinforced strengthening.
| Translated title of the contribution | Carbon reinforced concrete - An alternative method für strengthening Concrete Bridges Part 2: Strengthening of concrete bridges with carbon reinforced concrete – pilot project “federal highway bridges (A 648) across the river Nidda |
|---|
Details
| Original language | German |
|---|---|
| Pages (from-to) | 109-117 |
| Number of pages | 9 |
| Journal | Beton- und Stahlbetonbau |
| Volume | 116 |
| Issue number | 2 |
| Publication status | Published - Feb 2021 |
| Peer-reviewed | Yes |
External IDs
| ORCID | /0000-0003-0049-8534/work/108975201 |
|---|---|
| Scopus | 85099413925 |
| Mendeley | b72ecfd2-465b-33ed-adf2-191331d31285 |
Keywords
ASJC Scopus subject areas
Keywords
- bridge constructions, carbon reinforced concrete, existing bridges, pre-stressed reinforced structures, strengthening of concrete structures, stress corrosion cracking