Analysis of the Operation Characteristics of a Hybrid Heat Pump in an Existing Multifamily House Based on Field Test Data and Simulation

Research output: Contribution to journalResearch articleContributedpeer-review

Contributors

  • Daniel Neubert - , Chair of Building Energy Systems and Heat Supply, Bosch Thermotechnik GmbH (Author)
  • Christian Glück - , Bosch Thermotechnik GmbH (Author)
  • Julian Schnitzius - , Bosch Thermotechnik GmbH (Author)
  • Armin Marko - , Bosch Thermotechnik GmbH (Author)
  • Jeannette Wapler - , Fraunhofer Institute for Solar Energy Systems (Author)
  • Constanze Bongs - , Fraunhofer Institute for Solar Energy Systems (Author)
  • Clemens Felsmann - , Chair of Building Energy Systems and Heat Supply (Author)

Abstract

Unrenovated multifamily houses in Germany are mostly heated by fossil heat generators; therefore, measures are required for CO2 emission reduction. The use of air–water heat pumps is restricted by high required flow temperatures and heat output but can be mitigated by hybrid heat pumps. To limit additional operation costs by the heat pump, a new operation strategy is introduced in this study, which allows to maintain a target CO2 emission. The operation strategy is applied in a field trial in a small unrenovated multifamily house built in 1964. A thermohydraulic simulation model is verified and is used in full-year simulations to apply improvement measures and compare the new control strategy with existing optimizing strategies. The results show that the control onto target emissions is possible and limits additional costs but can also result in higher CO2 mitigation costs, making it less favorable. The hybrid heat pump reduces the direct fossil CO2 emissions by 61% (in total by 22%); thus, it is a relevant solution for multifamily houses, especially within a further decarbonized electrical grid.

Details

Original languageEnglish
Article number5611
JournalEnergies
Volume15
Issue number15
Publication statusPublished - Aug 2022
Peer-reviewedYes