The Cracking and Tensile-Load-Bearing Behaviour of Concrete Reinforced with Sanded Carbon Grids

Publikation: Beitrag in FachzeitschriftForschungsartikelBeigetragenBegutachtung

Abstract

This article presents the cracking and load-bearing behaviour of carbon-reinforced prismatic concrete tensile specimens. Grids with different geometries and impregnations were used as carbon reinforcement. In addition, the roving surfaces were partially coated with a fine sand to improve the bond between concrete and reinforcement. The article shows the influence of the different
parameters on the developing cracks with respect to their width and spacing from each other. The material properties and tensile strengths of carbon concrete are also presented. These can be used for calculations. A fine-grained, commercially available shotcrete was used for the investigations. Based
on the tests and results described in this article, an influence of the sanded carbon grids on the crack properties (crack widths, crack spacing) could be shown in comparison to unsanded carbon grids.

Details

OriginalspracheEnglisch
Aufsatznummer2652
Seiten (von - bis)1-15
Seitenumfang15
Fachzeitschrift Buildings : open access journal
Jahrgang13
Ausgabenummer10
PublikationsstatusVeröffentlicht - 21 Okt. 2023
Peer-Review-StatusJa

Externe IDs

Scopus 85175044469
ORCID /0000-0003-4807-8387/work/146644087
ORCID /0000-0001-8735-1345/work/146644262
ORCID /0000-0002-1596-7164/work/146646204
Mendeley 9325ff2e-4963-3651-8ee4-fa07d68e3056

Schlagworte

Schlagwörter

  • CUBE, carbon, carbon reinforced concrete (CRC), crack width, fine grained concrete, grid, load-bearing behaviour, sanding, surface modification, tensile test, textile